Thursday, April 3, 2014

Phison PS2251-07 USB recovery Tools


Phison PS2251-07 USB recovery Tools
How to repair corrupted Phison PS2251-07 or PS2307 or UP307 Chip controllers .Download Phison PS2251-07 USB recovery tools fro free now .

Phison PS2251-07 Format tools


  Phison PS2251-07 USB recovery Tools

How to fix corrupted Phison PS2251-07 Chip controller ? 

First we must be sure that our USB flash drive chip vendor is Phison PS2251-07 or Phison UP307 or Phison PS2307 "all this chip vendor is the same PS2251-07 " .To be sure of that please use the Chip Genius software report . You will find chip vendor is Phison and chip vendor model will be PS2251-07 .




Phison PS2251-07 USB recovery ToolsNow Download Phison PS2251-07 USB recovery tools fron the download links in the bottom of this article .The flash drive repair tools for Phison PS2307 will be the following software :
    Phison PS2251-07 USB recovery Tools
  • Phison ST-TOOL
  • Phison Low Level formatter
  • Buffalo Low level formatter
  • Silicon Power Low Level Format utility

First use Phison ST Stool software ,insert your Corrupted usb stick to your PC then if this software is the correct software , you will find your flash drive information appear on Phison ST Stool software .Now Click Start to begin updating your USB flash drive firmware .




Second , If the previous software doesn't fix your Phison PS2251-07 Flash drive so please use the next software "Phison Low Level formatter " .Try using the Recovery software in the Phison PS2251-07 Zipped Folder .

If this software doesn't work with your flash drive ,go to the second solution "remove the case of the flash drive and write in a comment the details that exist on the chip controller of flash drive board and i will try to find the best firmware for you .

You can try this solution also , please read the following articles :

Download Phison PS2251-07 Recovery tools





Phison PS2251-07 format tool download 

58 comments:

  1. Tried the SD-TOOL, it sees the drive, but when I click start it just sits there and does nothing. The timer counts up and that is about it.

    I tried the tool on a working PS2251-07 and the same results. What could be the issue?

    ReplyDelete
    Replies
    1. There are 3 versions of SD tool ,try them all >> here >>http://adf.ly/tDyXl >> or >>http://adf.ly/tDydB >> or http://adf.ly/tDyid and tell me the result

      Delete
    2. Doesn't work for me either Ashraaf. ST-Tool shows the flash drive as red when I click update and reads:

      Driver: D: Mode 3
      ID Issue 0002 [ 98 DE 98 92 72 50 A]

      tried it in both a USB 2.0 and a USB 3.0 port with same results

      Delete
    3. I have the same issue... counter works but i am getting the

      ID Issue 0002 [ 98 DE 98 92 72 50 A]

      Delete
    4. Ashraaf, getting the same problem as everyone else has complained about. I opened my USB drive case to see the activity light and it never lights up on all three versions of the software you just linked. If I try to use a low level format program in the originals article's files, the activity light will light up, stay up, and it will give an error. That is the most I've seen it do.

      Delete
    5. User the Restore-v3.13.0.0 and just select Restore. That should be fine for these minimally secure drives.

      Delete
    6. just use simple low level formating...
      Formatter_SiliconPower
      its work for me.. :D

      Delete
  2. Hi Phillip I get the same error

    ReplyDelete
  3. Product Model: silicon-power
    Product Revision: PMAP

    Chip Vendor: Phison
    Chip Part-Number: PS2251-07(PS2307) - F/W 01.03.53 [2014-08-13]
    Flash ID Code: 983AA892 - Toshiba [TLC]

    Please help me Try ALL APPLICATIONS.. Νot working

    ReplyDelete
  4. Same here. This is an 8GB MentorMedia stick from Dell, P/N KR2H9_A00

    ReplyDelete
  5. Same here 8GB dell "blue label" disk. Bricked! -2 error

    ReplyDelete
  6. I am trying to put Write protection to Kingston data Traveler with Phison PS2251-07(PS2307). Using MPFALL program and setting Write Protect, the Start Command produces Sub id Error 0x1042 [CS]:0x350DE1AC and no change to the stick. I expect to generate a USB Flash Drive thas has some video on it and is write protected so that the final user cannot erase or format the drive. Please help me. ¿How can this achived? Thanks in advance for your help.

    ReplyDelete
  7. Dear Ashraaf, please help us! I've got the same error as the others: the timer counts up but that's all.

    ReplyDelete
  8. Any solution to the blue label Dell KR2H9 disks?

    ReplyDelete
  9. http://i60.tinypic.com/34oy8fd.jpg (right name)

    http://i57.tinypic.com/2cfco6w.jpg (wrong name)

    My USB stick (Kingston DT111 64 GB) doesn't work anymore. I only see it under device manager, but ounder the wrong name by Phison. I checked it under usbdeview. I want to save my files, before format it. Help. (deftrixx@gmail.com)

    ReplyDelete
  10. Dear, not working for me either.
    Tool returning following error in red box.
    Driver: D: Mode 3
    ID Issue 0002 [ 98 DE 98 92 72 50 A]

    ReplyDelete
  11. someone has solved the problem with dell 8gb usb ??

    ReplyDelete
  12. Assalam O Aliekum
    Dear Ashraf,
    Few days ago I got this issue with my Kigston 32gb USB; I tried this method but useless...
    I have another same to same usb (same brand, same capacity, same chipset, ect.) So,
    Is it possible to extract firmware of one USB and write it to defected USB?
    Regards:
    Saad Bin Khalid

    ReplyDelete
  13. I have a Patriot Supersonic Rage 2, that's uses a PS2251-08. PID: 13FE VID:6000 The latest version of MPALL (v3.71) doesn't support the PS2251-08, is there a newer version?

    ReplyDelete
  14. I have tried it on my FD kingstone G3..
    100% work very well, thanks for share man :)

    ReplyDelete
  15. Does anybody know why are a lot of u s getting Error ID Issue 0002 in red box?

    ReplyDelete
  16. ST-TOOL just dont do anythin, whatever setting you enter.....

    ReplyDelete
  17. Chip Details:
    PHISON PS2251-07-V
    UO1419C
    SCLNY1CC
    Size: 8GB
    Info from ChipGenius:
    F/W 01.03.53 [2014-08-24]
    Device was locked from factory (Dell Windows 8.1) Tried some of these format utilities to unlock it, but now no drive shows up when I plug it in. Would appreciate a way to reinstall firmware and get the device working again

    ReplyDelete
  18. id issue DDD2[98 3A A8 92 76 50 8]
    HOW TO UPDATE IT FREAMWARE

    ReplyDelete
  19. I try many times to re-flash or formatting (Kingston DT100 G3 16GB) with this firmware with out any result .. except losing whole default firmware and totally disappear from windows or any formatting tools.
    Can you solve this problem ?

    ReplyDelete
  20. Kingston DT R3.0 G2 32Gb - PHISON PS2251-07(PS2307) - F/W 01.09.10
    not booting on mainboard ASSUS M3A78-EMH , AMD780G/SB700 chipset (USB2.0)
    boot on the Dell Optiplex 755 computer , Intel set chipsets(ICH5) (USB2.0)
    WHY ?

    ReplyDelete
  21. Not work on my pendrive, those with features:
    Description: [F:]Dispositivo de almacenamiento USB(Kingston DataTraveler 3.0)
    Device Type: Mass Storage Device

    Protocal Version: USB 3.00
    Current Speed: Super Speed
    Max Current: 896mA

    USB Device ID: VID = 0951 PID = 1666
    Serial Number: 60A44C3FAFD5B020B97B0002

    Device Vendor: Kingston
    Device Name: DataTraveler 3.0
    Device Revision: 0100

    Manufacturer: Kingston
    Product Model: DataTraveler 3.0
    Product Revision: PMAP

    Controller Vendor: Phison
    Controller Part-Number: PS2251-07(PS2307) - F/W 01.02.53 [2014-05-12]
    Flash ID code: 983AA892 - Toshiba [TLC]

    ReplyDelete
  22. USB Device ID: VID = 0951 PID = 16A3
    Serial Number: 1C6F654E4168BEC17925212C

    Device Vendor: Kingston
    Device Name: DT microDuo 3.0
    Device Revision: 0100

    Manufacturer: Kingston
    Product Model: DT microDuo 3.0
    Product Revision: PMAP

    Controller Vendor: Phison
    Controller Part-Number: PS2251-07(PS2307) - F/W 01.03.53 [2014-06-10]
    Flash ID code: 98DE9892 - Toshiba [TLC]

    ReplyDelete
  23. Description: [M:]USB Mass Storage Device(Kingston DataTraveler 3.0)
    Device Type: Mass Storage Device

    Protocal Version: USB 2.10 <- Hint: This is a USB3.0 device working at USB2.0 mode
    Current Speed: High Speed
    Max Current: 300mA

    USB Device ID: VID = 0951 PID = 1666
    Serial Number: 50E549C3445FB010B9686237

    Device Vendor: Kingston
    Device Name: DataTraveler 3.0
    Device Revision: 0110

    Manufacturer: Kingston
    Product Model: DataTraveler 3.0
    Product Revision: PMAP

    Chip Vendor: Phison
    Chip Part-Number: PS2251-07(PS2307) - F/W 01.02.55 [2015-09-03]
    Flash ID Code: 983A98A3 - Toshiba [TLC]

    Tools on web: http://dl.mydigit.net/special/up/phison.html

    هل يتوافر السوفت وير الخاص بهذه الفلاشة و شكرا مقدماً

    ReplyDelete
  24. Greetings Ashraaf, It would be nice if you pleas could help me to fix my usb memory , the features from Chip genius 4.0 are as follow , I´ve tried to fix it with UPtools but not work . thanks and congratulations for your great Blog.

    Description: [D:]Dispositivo de almacenamiento USB(USB DISK 3.0 Pro)
    Device Type: Mass Storage Device

    Protocal Version: USB 2.10 <- Hint: This device can run faster when plugged to a USB3.0 port
    Current Speed: High Speed
    Max Current: 300mA

    USB Device ID: VID = 13FE PID = 5523
    Serial Number: 070B6322EA6B7681

    Device Name: USB DISK 3.0 Pro
    Device Revision: 0100

    Product Model: USB DISK 3.0 Pro
    Product Revision: PMAP

    Controller Vendor: Phison
    Controller Part-Number: PS2251-07(PS2307) - F/W 05.01.53 [2015-12-22]
    Flash ID code: 983AA892 - Toshiba TC58NVG7T2JTA00 [TLC-8K]

    Tools on web: http://dl.mydigit.net/special/up/phison.html


    Possible Flash Part-Number
    ----------------------------
    [1CE]TC58NVG7T2JTA00
    [1CE]TC58TVG7T2JTA00
    [1CE]TC58TEG7TDKTA00
    [2CE]TH58NVG8T2JTA20
    [2CE]TH58TVG8T2JTA20
    [2CE]TH58TEG8TDKTA20
    [4CE]TH58NVG9T2JTA80
    [4CE]TH58TVG9T2JTA80


    Flash ID mapping table
    ----------------------------
    [Channel 0] [Channel 1]

    ReplyDelete
  25. phison
    ps2251-07-v
    uo1552c
    sqsln2cf

    i've tried everything, please help me

    ReplyDelete
  26. Description: [E:]USB Mass Storage Device(silicon-power)
    Device Type: Mass Storage Device

    Protocal Version: USB 3.10
    Current Speed: Super Speed
    Max Current: 504mA

    USB Device ID: VID = 13FE PID = 5500
    Serial Number: 7F006712A718E301

    Device Name: silicon-power
    Device Revision: 0100

    Product Model: silicon-power
    Product Revision: DL07

    Chip Vendor: Phison
    Chip Part-Number: PS2251-07(PS2307) - F/W 05.02.53 [2016-03-18]
    Flash ID Code: 983A98A3 - Toshiba [TLC]



    The TOOL works great.. It's just that, my 32GB became 28GB now.. So I've lost 4GB.
    But the thing is it's on SUPER SPEED which is so freaking great.. Fast transfer..

    The tools you guys see on this web works really fine.. You just have to find the right tool for you USB. Dead USB can be revive with the tools here.. Find the right tool and make sure you guys have a better understanding on how to run those tools before starting to flash firmware. Coz it will brick the chip for life.. RIP USB when it happens.. Thanks again to those who created and share ideas on how to fix USB.. Specially DISK WRITE PROTECT..

    ReplyDelete
    Replies
    1. Hi, i've tried with some tools and nothing happens, could you please helo me with tips?

      Delete
    2. First of all download phison UPTool_Ver2093(Release)_20150312
      go setting
      and enable clean button

      second Click Clean Button to erase old Firmware


      after erase you must see 2207 pram


      download MPALL_F1_7F00_DL07_v503_0A.zip


      for TLC use FW07V50253TW.BIN

      copy this lines to mp.ini

      [PenDriveMP]
      IC Type=PS2251-07
      [Parameter Mark]
      Parameter Type=F1_MP_21
      [Customize Info]
      USB VID=0x13FE
      USB PID=0x5500
      String Product Name=USB DISK 3.0
      Inquiry Version=DL07
      [Configuration]
      Reset Serial Number=0
      [TestItemOption]
      Do Preformat Test=1
      [Extra]
      Mode=3
      [Advance]
      FC1=0xFF
      FC2=0x01
      CheckUSBConnectorType=0x22
      [Firmware]
      ISP=1
      Burner File=BN07V502TAW.BIN
      Firmware Name=FW07V50253TW.BIN
      [Misc]
      Burner Erase All=1
      Wafer Erase All=1
      set1667=0x00
      ------------------------------
      i have a 32gb tlc Write Protect

      after Firmware now is worked fine

      Description: USB Mass Storage Device(Parlag USB DISK 3.0)
      Device Type: Mass Storage Device

      Protocal Version: USB 2.10 <- Hint: This device can run faster when plugged to a USB3.0 port
      Current Speed: High Speed
      Max Current: 300mA

      USB Device ID: VID = 13FE PID = 5500
      Serial Number: 7F006914CB8ABA00

      Device Vendor: Parlag
      Device Name: USB DISK 3.0
      Device Revision: 0100

      Manufacturer: Parlag
      Product Model: USB DISK 3.0
      Product Revision: DL07

      Controller Vendor: Phison
      Controller Part-Number: PS2251-07(PS2307) - F/W 05.02.53 [2016-03-18]
      Flash ID code: 454C98A3 - SanDisk [TLC]

      Delete
  27. asalamualaikum wr.wb
    i've got a dead kingston 64 gb with following specs:
    Description: [O:]USB Mass Storage Device(Kingston DataTraveler 3.0)
    Device Type: Mass Storage Device

    Protocal Version: USB 2.10 <- Hint: This is a USB3.0 device working at USB2.0 mode
    Current Speed: High Speed
    Max Current: 300mA

    USB Device ID: VID = 0951 PID = 1666
    Serial Number: 60A44C4252A8BEB1C99300F4

    Device Vendor: Kingston
    Device Name: DataTraveler 3.0
    Device Revision: 0100

    Manufacturer: Kingston
    Product Model: DataTraveler 3.0
    Product Revision: PMAP

    Chip Vendor: Phison
    Chip Part-Number: PS2251-07(PS2307) - F/W 01.02.53 [2014-05-12]
    Flash ID Code: 983AA892 - Toshiba [TLC]

    i kind'a mess up with the experiment using various combination of uptools and mpal, and mixed up firmware and burner file too.
    could you please help me with the correct variant?
    any off your tips will be much helpfull

    assalamualaikum wr.wb

    ReplyDelete
  28. PHISON 2251-07 I HAVE SOLUTION FOR THIS PENDRIVE WITH TOSHIBA FLASH, BUT WITCH Hynix OR MICRON NO, IF ANY OF YOU HAS RAPAIR SOMEONE PLEASE, SENDME AN EMAIL TO DARKMANCUBANO@GMAIL.COM

    ReplyDelete
  29. Did someone managed to fix the drive? I have Kingston datatraveler 100 g3 32gb?
    niklazni@yahoo.com

    ReplyDelete
  30. Hi, I faced the same problem.

    I have a 32GB OTG micro drive (manufac: Verbatim) as when plugging in windows automatically starts to install the drivers for 'PRAM 2307 USB device'. It doesn’t have any icon appeared in my computer and in Disk Management 'Removable Disk' shows no information beside it.

    How can I get windows to recognize the drive? Please email to me at colin_lim85@yahoo.com. Thank you.

    Please refer below for the details:

    Computer model: Aspire 5740G
    Maker: Acer
    OS: Windows 7 professional service pack 1

    Device Name: +[D:]+Generic USB Hub(2307 PRAM USB Device)
    PnP Device ID: VID = 8087 PID = 0020
    Serial Number: 5&&257B0F1D&&0&&1
    Revision: 1.00

    Device Type: Standard USB device - USB2.0 High-Speed

    Chip Vendor: (No match record)
    Chip Part-Number: (No match record)

    Product Vendor: 2307
    Product Model: PRAM

    Tools on Web: (N/A)

    ReplyDelete
    Replies
    1. Hay, for All.
      Also I have a DTDUO3/32GB Kingston USB3.0 OTG ( 04715-424.A00LF 5V TH:7661293 THAILAND )
      with Chip Vendor: PS2251-07(PS2307).
      I’m facing now with similar situations as you CHUNG (NO Icons appear on My Computer & Disk Management > No info on ‘”Removable Disk” )
      My mistake whose I format with Low Level Format Utility from Phison PS2251-07 USB recovery Tools > preformat application.
      From the moment of finished format I face with situation written above.
      Now I’m afraid to don’t brick the CIP of OTG.
      If there is someone to help in order to revive that OTG information’s are highly appreciated.

      Delete
    2. Hello, for All.
      Also I have a DTDUO3/32GB Kingston USB3.0 OTG ( 04715-424.A00LF 5V TH:7661293 THAILAND )
      with Chip Vendor: PS2251-07(PS2307).
      I’m facing now with similar situations as you CHUNG (NO Icons appear on My Computer & Disk Management > No info on ‘”Removable Disk” )
      My mistake whose I format with Low Level Format Utility from Phison PS2251-07 USB recovery Tools > preformat application.
      From the moment of finished format I face with situation written above.
      Now I’m afraid to don’t brick the CIP of OTG.
      If there is someone to help in order to revive that OTG information’s are highly appreciated.

      Delete
  31. write protected solve by Low Level Format Utility. works for my 32gb toshiba PS2251-07, thanks a lot for sharing.

    ReplyDelete
  32. Description: [G:]USB Mass Storage Device(13FE USB DISK 50X)
    Device Type: Mass Storage Device

    Protocal Version: USB 3.10
    Current Speed: Super Speed
    Max Current: 896mA

    USB Device ID: VID = 13FE PID = 5100

    Device Vendor: Phison
    Device Name: USB DISK 53X
    Device Revision: 0110

    Manufacturer: 13FE
    Product Model: USB DISK 50X
    Product Revision: PMAP

    Chip Vendor: Phison
    Chip Part-Number: PS2251-07(PS2307) - F/W 08.00.5D [2017-05-05]
    Flash ID Code: 983C98B3 - Toshiba [TLC]

    Where can i get the Firmware of this 64GB it says"Please insert a disk into a Removable disk"
    Need your help the format tools above not working.

    ReplyDelete
  33. Hello.
    First of all i have to say that this is a great-detailed tutorial!
    I followed all steps but i got errors.

    i have a write protected 64GB usb drive which i would like to format and use it again as a usb flash drive.

    Here is the detailed information of my devide.(i used ChipGenius_v4_00_0022)


    Description: [F:]USB Mass Storage Device(Wilk silicon-power)
    Device Type:Mass Storage Device

    Protocal Version: USB 2.10 <- Hint: This is a USB3.0 device working at USB2.0 mode
    Current Speed: High Speed
    Max Current: 300mA

    USB Device ID: VID = 13FE PID = 5500
    Serial Number: 070B7114D217C331

    Device Vendor: Wilk
    Device Name: silicon-power
    Device Revision: 0100

    Manufacturer: Wilk
    Product Model: silicon-power
    Product Revision: PMAP

    Chip Vendor: Phison
    Chip Part-Number: PS2251-07(PS2307) - F/W 06.04.00 [2016-12-01]
    Flash ID Code: 983A98A3 - Toshiba [TLC]

    Tools on web:http://dl.mydigit.net/special/up/phison.html




    Could you please help me step by step to format it?
    Thanks!

    ReplyDelete
  34. I have tried all possible solution with no success. The following are the information of the USB drive:


    Description: [H:]USB Mass Storage Device(Kingston DT microDuo 3.0)
    Device Type: Mass Storage Device

    Protocal Version: USB 2.10 <- Hint: This device can run faster when plugged to a USB3.0 port
    Current Speed: High Speed
    Max Current: 300mA

    USB Device ID: VID = 0951 PID = 16A3
    Serial Number: 00241D8CE55DBF403957EDFD

    Device Name: DT microDuo 3.0
    Device Revision: 0100

    Manufacturer: Kingston
    Product Model: DT microDuo 3.0
    Product Revision: PMAP

    Controller Vendor: Phison
    Controller Part-Number: PS2251-07(PS2307) - F/W 01.02.53 [2014-05-12]
    Flash ID code: 983AA892 - Toshiba TC58NVG7T2JTA00 [TLC-8K]

    Tools on web: http://dl.mydigit.net/special/up/phison.html.


    I would appreciate very much to recover, format, or revive the USB drive. Thanks in advance.

    ReplyDelete
  35. Hello,
    I have a phison ps2251-07 (VID 13FE PID 5500) with the wrong firmware installed. Now the stick is recognized by windows, but can not be started (error 10), in mpall the stick is not recognized. The LED is permanently lit. All repair tools do not find the stick. What else can I try?

    ReplyDelete
  36. Description: [F:]USB Mass Storage Device(TOSHIBA MSFT NORB)
    Device Type: Mass Storage Device

    Protocal Version: USB 3.00
    Current Speed: High Speed
    Max Current: 126mA

    USB Device ID: VID = 0930 PID = 1400
    Serial Number: MSFTASTAM207086BA06B7D2799

    Device Vendor: TOSHIBA
    Device Name: MSFT NORB
    Device Revision: 0110

    Manufacturer: TOSHIBA
    Product Model: MSFT NORB
    Product Revision: PMAP

    Chip Vendor: Phison
    Chip Part-Number: PS2251-07(PS2307) - F/W 01.01.55 [2015-04-23]
    Flash ID Code: 98DE88A3 - Toshiba [TLC]

    Tools on web: http://dl.mydigit.net/special/up/phison.html

    Not able to crack, any update, as i have tried all version of Phison MPALL v3.72.0B

    ReplyDelete
  37. Thanks a lot...
    I worked for me
    I found this helpful article after trying seven days

    ReplyDelete
  38. Details of My Pendrive:
    USB Device ID: VID = 1005 PID = B128
    Serial Number: 070364CD300AAE48

    Device Vendor: USB3.0
    Device Name: FLASH DRIVE
    Device Revision: 0110

    Manufacturer: USB3.0
    Product Model: FLASH DRIVE
    Product Revision: PMAP

    Controller Vendor: Phison
    Controller Part-Number: PS2251-07(PS2307) - F/W 01.00.55 [2015-04-17]
    Flash ID code: 983A98A37651 - Toshiba TC58TEG7THLTA00 [TLC-16K]

    Please, send my original firmware to solve my pendrive.

    my gmail is : dipankarselfactive@gmail.com

    ReplyDelete
  39. ALGUIEN SABE LA SOLUCION PARA ESTA USB
    ESTA PROTEGIDA CONTRA ESCRITURA Y NO SE PUEDE QUITAR
    NECESITO UNA AYUDA MI NUMWEO WHATSAPP ES 3503869284

    Volume: D:
    Controller: Phison PS2307
    Possible Memory Chip(s): Not available
    Flash ID: AD3A1803 0050
    Chip F/W: 08.03.50
    Firmware Date: 2018-05-11
    ID_BLK Ver.: 1.4.39.0
    MP Ver.: MPALL v5.35.39
    VID: 0951
    PID: 1666
    Manufacturer: Kingston
    Product: DataTraveler 3.0
    Query Vendor ID: Kingston
    Query Product ID: DataTraveler 3.0
    Query Product Revision: PMAP
    Physical Disk Capacity: 31004295168 Bytes
    Windows Disk Capacity: 31004294656 Bytes
    Internal Tags: 2Q6P-8X74
    File System: NTFS
    USB Version: 3.10
    Declared Power: 504 mA
    ContMeas ID: 2B3D-02-00
    Microsoft Windows 10 x64 Build 18363
    ------------------------------------
    http://www.antspec.com/usbflashinfo/
    Program Version: 9.3.0.630

    ReplyDelete
  40. Plz help me. How can i format my Kingston 32GB USB. Chip vender: phison(??)vid 13fe pid 5500

    ReplyDelete
  41. It kind of worked on my kingston dt50 64GB Phison 2251-07, with the tool Low Level Format Utility. In my case it was detected as a thumb drive but impossible to format (write protected). With the tool at first started OK, then as soon it's stopped working windows explorer gave the options for the drive as normal. Reformated from windows and no further problems.

    ReplyDelete
  42. Necesito la contraseña para poder formatear mi USB, donde la puedo encontrar.

    ReplyDelete
  43. Me funcionó 😃 pero no sé restablecieron los 16gb, si no 4gb. Pero dentro de todo contento porque funciona, solo por si acaso, hay alguna forma de restablecer los 16gb?. Muchas gracias

    ReplyDelete
  44. Description: [E:]USB Mass Storage Device(13FE USB DISK 50X)
    Device Type: Mass Storage Device

    Protocal Version: USB 3.10
    Current Speed: High Speed
    Max Current: 896mA

    USB Device ID: VID = 13FE PID = 5100

    Device Vendor: Phison
    Device Name: USB DISK 53X
    Device Revision: 0110

    Manufacturer: 13FE
    Product Model: USB DISK 50X
    Product Revision: PMAP

    Controller Vendor: Phison
    Controller Part-Number: PS2251-07(PS2307) - F/W 08.00.50 [2016-08-25]
    Flash ID code: AD3A18030050 - Hynix [TLC]

    Tools on web: http://dl.mydigit.net/special/up/phison.html

    I try this tutorial N is working!!, my usb is back online now, thank you so much

    ReplyDelete
  45. Description: [H:]USB Mass Storage Device(2309 HV TESTER)
    Device Type: Mass Storage Device

    Protocal Version: USB 2.00
    Current Speed: High Speed
    Max Current: 100mA

    USB Device ID: VID = 13FE PID = 5100

    Device Vendor: Phison
    Device Name: 2309 FW SORTING
    Device Revision: 0110

    Product Model: 2309 HV TESTER
    Product Revision: 1.00

    Controller Vendor: Phison
    Controller Part-Number: PS2251-07(PS2307) - F/W 01.00.10 [2020-04-28]
    Flash ID code: 983C98B37672 - KIOXIA TC58TFG8T22TA0D [TLC-16K]
    sabhi software use no solusion please help

    ReplyDelete
  46. Description: [F:]USB Mass Storage Device(2309 PRAM)
    Device Type: Mass Storage Device

    Protocal Version: USB 2.00
    Current Speed: Full Speed
    Max Current: 100mA

    USB Device ID: VID = 13FE PID = 5500

    Device Vendor: Phison
    Device Name: 2309 Boot ROM
    Device Revision: 0110

    Product Model: 2309 PRAM
    Product Revision: 1.00

    Controller Vendor: Phison
    Controller Part-Number: PS2251-09(PS2309) - F/W 01.01.10 [2016-11-09]
    Flash ID code: 983A98B37672 - KIOXIA TC58TFG7T23TA0D [TLC-16K]

    Tools on web: http://dl.mydigit.net/special/up/phison.html
    need a repair tool for this usb
    please help

    ReplyDelete