Flash Drive Repair

Format corrupted Innostor flash controllers that have chip part number Innostor IS916-B1, IS916-C1, IS916-D0, IS916-D1.Download Innostor IS916 MP Tool v2.10.02.49 firmware and fix your flash disk .

Innostor IS916 MP Tool v2.10.02.4

Innostor IS916 MP Tool v2.10.02.49 has been designed to reformat Innostor Flash controllers .Innostor IS916 MP Tool v2.10.02.49 format tool support updating the flash controller firmware of the following Innostor chip vendor : Innostor IS916-B1, IS916-C1, IS916-D0, IS916-D1 .Innostor IS916 MP Tool v2.10.02.49 formatter can fix Innostor flash drives format errors such as raw flash disk ,write protection ,insert disk error message , no media and other format problems .

Innostor IS916 MP Tool v2.10.02.49 can recover the previous chip controllers and it has been recovered Verbatim store n go USB flash drive 16GB with IS916 chip vendor with the following chip genius report :

Verbatim store n go USB flash drive 16GB chip genius report :
Device Type: Mass Storage Device
Protocal Version: USB 2.10
Current Speed: High Speed
Max Current: 200mA
USB Device ID: VID = 1F75 PID = 0916
Device Vendor: Innostor Technology Corp.
Device Name: IS916EN
Device Revision: 0001
Manufacturer: Innostor
Product Model: NAND Flash
Product Revision: 1.00
Chip Vendor: Innostor(??)
Chip Part-Number: IS916

Innostor IS916 MP Tool v2.10.02.49 firmware support repairing the previous chip controllers , so please don't use it with different controllers .First determine your USB flash disk chip vendor , you can use Chip genius software or USB Deview V2.30 utility.

How to update Innostor IS916 flash drive firmware ?

Download Innostor IS916 MP Tool v2.10.02.49.rar from download links below .
Insert corrupted Innostor IS916 flash disk to your PC .
Extract Innostor IS916 MP Tool v2.10.02.49.rar and open Innostor IS916 MP Tool v2.10.02.49.exe .
If your flash controller is supported , you will see flash info appears on the software interface .
Click Start to update flash controller firmware .
If you need to change configuration " Config Password : IS0024 " .

If this software doesn't work with your flash drive ,go to the second solution "remove the case of the flash drive and write in a comment the details that exist on the chip controller of flash drive board and i will try to find the best firmware for you .

You can try this solution also , please read the following articles :

1- Best usb flash drive format software download

2- How to repair corrupted SD memory card