tag:blogger.com,1999:blog-5051833343195891315.post8319658626573941827..comments2024-03-28T16:33:53.941+03:00Comments on Flash Drive Repair : Phison PS2251-07 USB recovery ToolsFlash Drive Repairhttp://www.blogger.com/profile/07314077601998366634noreply@blogger.comBlogger58125tag:blogger.com,1999:blog-5051833343195891315.post-68528461994038525492023-12-27T12:11:59.533+03:002023-12-27T12:11:59.533+03:00Description: [F:]USB Mass Storage Device(2309 PRAM...Description: [F:]USB Mass Storage Device(2309 PRAM)<br />Device Type: Mass Storage Device<br /><br />Protocal Version: USB 2.00<br />Current Speed: Full Speed<br />Max Current: 100mA<br /><br />USB Device ID: VID = 13FE PID = 5500<br /><br />Device Vendor: Phison<br />Device Name: 2309 Boot ROM<br />Device Revision: 0110<br /><br />Product Model: 2309 PRAM<br />Product Revision: 1.00<br /><br />Controller Vendor: Phison<br />Controller Part-Number: PS2251-09(PS2309) - F/W 01.01.10 [2016-11-09]<br />Flash ID code: 983A98B37672 - KIOXIA TC58TFG7T23TA0D [TLC-16K]<br /><br />Tools on web: http://dl.mydigit.net/special/up/phison.html<br />need a repair tool for this usb<br />please help<br />Anonymousnoreply@blogger.comtag:blogger.com,1999:blog-5051833343195891315.post-19396299349109214232023-06-02T14:09:42.512+03:002023-06-02T14:09:42.512+03:00Description: [H:]USB Mass Storage Device(2309 HV T...Description: [H:]USB Mass Storage Device(2309 HV TESTER)<br />Device Type: Mass Storage Device<br /><br />Protocal Version: USB 2.00<br />Current Speed: High Speed<br />Max Current: 100mA<br /><br />USB Device ID: VID = 13FE PID = 5100<br /><br />Device Vendor: Phison<br />Device Name: 2309 FW SORTING<br />Device Revision: 0110<br /><br />Product Model: 2309 HV TESTER<br />Product Revision: 1.00<br /><br />Controller Vendor: Phison<br />Controller Part-Number: PS2251-07(PS2307) - F/W 01.00.10 [2020-04-28]<br />Flash ID code: 983C98B37672 - KIOXIA TC58TFG8T22TA0D [TLC-16K]<br />sabhi software use no solusion please helpAnonymousnoreply@blogger.comtag:blogger.com,1999:blog-5051833343195891315.post-3618177290878292602023-03-03T11:01:42.256+03:002023-03-03T11:01:42.256+03:00Description: [E:]USB Mass Storage Device(13FE USB ...Description: [E:]USB Mass Storage Device(13FE USB DISK 50X)<br />Device Type: Mass Storage Device<br /><br />Protocal Version: USB 3.10<br />Current Speed: High Speed<br />Max Current: 896mA<br /><br />USB Device ID: VID = 13FE PID = 5100<br /><br />Device Vendor: Phison<br />Device Name: USB DISK 53X<br />Device Revision: 0110<br /><br />Manufacturer: 13FE<br />Product Model: USB DISK 50X<br />Product Revision: PMAP<br /><br />Controller Vendor: Phison<br />Controller Part-Number: PS2251-07(PS2307) - F/W 08.00.50 [2016-08-25]<br />Flash ID code: AD3A18030050 - Hynix [TLC]<br /><br />Tools on web: http://dl.mydigit.net/special/up/phison.html<br /><br />I try this tutorial N is working!!, my usb is back online now, thank you so much Jonnyhttps://www.kaskus.co.id/@Sanphingnoreply@blogger.comtag:blogger.com,1999:blog-5051833343195891315.post-17691374207775535872022-10-08T13:32:32.879+03:002022-10-08T13:32:32.879+03:00Me funcionó 😃 pero no sé restablecieron los 16gb,...Me funcionó 😃 pero no sé restablecieron los 16gb, si no 4gb. Pero dentro de todo contento porque funciona, solo por si acaso, hay alguna forma de restablecer los 16gb?. Muchas gracias Anonymousnoreply@blogger.comtag:blogger.com,1999:blog-5051833343195891315.post-72931066580819144952022-04-01T00:27:26.726+03:002022-04-01T00:27:26.726+03:00Necesito la contraseña para poder formatear mi USB...Necesito la contraseña para poder formatear mi USB, donde la puedo encontrar.Anonymoushttps://www.blogger.com/profile/12447703203728042812noreply@blogger.comtag:blogger.com,1999:blog-5051833343195891315.post-46890619704814818632022-01-02T06:13:14.465+03:002022-01-02T06:13:14.465+03:00It kind of worked on my kingston dt50 64GB Phison ...It kind of worked on my kingston dt50 64GB Phison 2251-07, with the tool Low Level Format Utility. In my case it was detected as a thumb drive but impossible to format (write protected). With the tool at first started OK, then as soon it's stopped working windows explorer gave the options for the drive as normal. Reformated from windows and no further problems.Anonymoushttps://www.blogger.com/profile/07329807112979126485noreply@blogger.comtag:blogger.com,1999:blog-5051833343195891315.post-23786507474216231212020-09-14T12:11:35.614+03:002020-09-14T12:11:35.614+03:00Plz help me. How can i format my Kingston 32GB US...Plz help me. How can i format my Kingston 32GB USB. Chip vender: phison(??)vid 13fe pid 5500Altaf Hussain Zaidihttps://www.blogger.com/profile/14044298509962323642noreply@blogger.comtag:blogger.com,1999:blog-5051833343195891315.post-38725700419617885512020-05-05T08:25:51.554+03:002020-05-05T08:25:51.554+03:00ALGUIEN SABE LA SOLUCION PARA ESTA USB
ESTA PROTE...ALGUIEN SABE LA SOLUCION PARA ESTA USB <br />ESTA PROTEGIDA CONTRA ESCRITURA Y NO SE PUEDE QUITAR<br />NECESITO UNA AYUDA MI NUMWEO WHATSAPP ES 3503869284<br /><br />Volume: D:<br />Controller: Phison PS2307<br />Possible Memory Chip(s): Not available<br />Flash ID: AD3A1803 0050<br />Chip F/W: 08.03.50<br />Firmware Date: 2018-05-11<br />ID_BLK Ver.: 1.4.39.0<br />MP Ver.: MPALL v5.35.39<br />VID: 0951<br />PID: 1666<br />Manufacturer: Kingston<br />Product: DataTraveler 3.0<br />Query Vendor ID: Kingston<br />Query Product ID: DataTraveler 3.0<br />Query Product Revision: PMAP<br />Physical Disk Capacity: 31004295168 Bytes<br />Windows Disk Capacity: 31004294656 Bytes<br />Internal Tags: 2Q6P-8X74<br />File System: NTFS<br />USB Version: 3.10<br />Declared Power: 504 mA<br />ContMeas ID: 2B3D-02-00<br />Microsoft Windows 10 x64 Build 18363<br />------------------------------------<br />http://www.antspec.com/usbflashinfo/<br />Program Version: 9.3.0.630<br />Anonymousnoreply@blogger.comtag:blogger.com,1999:blog-5051833343195891315.post-89739635302685459072020-02-19T13:45:25.936+03:002020-02-19T13:45:25.936+03:00Details of My Pendrive:
USB Device ID: VID = 1005 ...Details of My Pendrive:<br />USB Device ID: VID = 1005 PID = B128<br />Serial Number: 070364CD300AAE48<br /><br />Device Vendor: USB3.0<br />Device Name: FLASH DRIVE<br />Device Revision: 0110<br /><br />Manufacturer: USB3.0<br />Product Model: FLASH DRIVE<br />Product Revision: PMAP<br /><br />Controller Vendor: Phison<br />Controller Part-Number: PS2251-07(PS2307) - F/W 01.00.55 [2015-04-17]<br />Flash ID code: 983A98A37651 - Toshiba TC58TEG7THLTA00 [TLC-16K]<br /><br />Please, send my original firmware to solve my pendrive.<br /><br />my gmail is : dipankarselfactive@gmail.comDipankar Mandalhttps://www.blogger.com/profile/03251703809475770273noreply@blogger.comtag:blogger.com,1999:blog-5051833343195891315.post-49687246146157664412019-06-07T23:27:04.041+03:002019-06-07T23:27:04.041+03:00just use simple low level formating...
Formatter_S...just use simple low level formating...<br />Formatter_SiliconPower<br />its work for me.. :DAnonymousnoreply@blogger.comtag:blogger.com,1999:blog-5051833343195891315.post-39674410415279305802019-05-02T00:34:25.988+03:002019-05-02T00:34:25.988+03:00Thanks a lot...
I worked for me
I found this helpf...Thanks a lot...<br />I worked for me<br />I found this helpful article after trying seven daysHaseeb Jan Hamrazhttps://www.blogger.com/profile/18096246322908707349noreply@blogger.comtag:blogger.com,1999:blog-5051833343195891315.post-69227040932957245442018-12-14T17:00:34.930+03:002018-12-14T17:00:34.930+03:00Description: [F:]USB Mass Storage Device(TOSHIBA M...Description: [F:]USB Mass Storage Device(TOSHIBA MSFT NORB)<br />Device Type: Mass Storage Device<br /><br />Protocal Version: USB 3.00<br />Current Speed: High Speed<br />Max Current: 126mA<br /><br />USB Device ID: VID = 0930 PID = 1400<br />Serial Number: MSFTASTAM207086BA06B7D2799<br /><br />Device Vendor: TOSHIBA<br />Device Name: MSFT NORB<br />Device Revision: 0110<br /><br />Manufacturer: TOSHIBA<br />Product Model: MSFT NORB<br />Product Revision: PMAP<br /><br />Chip Vendor: Phison<br />Chip Part-Number: PS2251-07(PS2307) - F/W 01.01.55 [2015-04-23]<br />Flash ID Code: 98DE88A3 - Toshiba [TLC]<br /><br />Tools on web: http://dl.mydigit.net/special/up/phison.html<br /><br />Not able to crack, any update, as i have tried all version of Phison MPALL v3.72.0BAnonymoushttps://www.blogger.com/profile/08038750950061391736noreply@blogger.comtag:blogger.com,1999:blog-5051833343195891315.post-64793034033209948142018-10-25T13:10:41.635+03:002018-10-25T13:10:41.635+03:00Hello,
I have a phison ps2251-07 (VID 13FE PID 550...Hello,<br />I have a phison ps2251-07 (VID 13FE PID 5500) with the wrong firmware installed. Now the stick is recognized by windows, but can not be started (error 10), in mpall the stick is not recognized. The LED is permanently lit. All repair tools do not find the stick. What else can I try?d.Arkgiernoreply@blogger.comtag:blogger.com,1999:blog-5051833343195891315.post-84840594434767838062018-08-12T03:43:02.340+03:002018-08-12T03:43:02.340+03:00User the Restore-v3.13.0.0 and just select Restore...User the Restore-v3.13.0.0 and just select Restore. That should be fine for these minimally secure drives.Anonymoushttps://www.blogger.com/profile/03327890198348099910noreply@blogger.comtag:blogger.com,1999:blog-5051833343195891315.post-79539261321318336692018-08-08T02:01:10.255+03:002018-08-08T02:01:10.255+03:00I have tried all possible solution with no success...I have tried all possible solution with no success. The following are the information of the USB drive:<br /><br /><br />Description: [H:]USB Mass Storage Device(Kingston DT microDuo 3.0)<br />Device Type: Mass Storage Device<br /><br />Protocal Version: USB 2.10 <- Hint: This device can run faster when plugged to a USB3.0 port<br />Current Speed: High Speed<br />Max Current: 300mA<br /><br />USB Device ID: VID = 0951 PID = 16A3<br />Serial Number: 00241D8CE55DBF403957EDFD<br /><br />Device Name: DT microDuo 3.0<br />Device Revision: 0100<br /><br />Manufacturer: Kingston<br />Product Model: DT microDuo 3.0<br />Product Revision: PMAP<br /><br />Controller Vendor: Phison<br />Controller Part-Number: PS2251-07(PS2307) - F/W 01.02.53 [2014-05-12]<br />Flash ID code: 983AA892 - Toshiba TC58NVG7T2JTA00 [TLC-8K]<br /><br />Tools on web: http://dl.mydigit.net/special/up/phison.html.<br /><br /><br />I would appreciate very much to recover, format, or revive the USB drive. Thanks in advance.<br />Anonymousnoreply@blogger.comtag:blogger.com,1999:blog-5051833343195891315.post-48996069487213740792018-07-02T12:00:44.981+03:002018-07-02T12:00:44.981+03:00Hello.
First of all i have to say that this is a g...Hello.<br />First of all i have to say that this is a great-detailed tutorial!<br />I followed all steps but i got errors.<br /><br />i have a write protected 64GB usb drive which i would like to format and use it again as a usb flash drive.<br /><br />Here is the detailed information of my devide.(i used ChipGenius_v4_00_0022)<br /><br /><br />Description: [F:]USB Mass Storage Device(Wilk silicon-power)<br />Device Type:Mass Storage Device<br /><br />Protocal Version: USB 2.10 <- Hint: This is a USB3.0 device working at USB2.0 mode<br />Current Speed: High Speed<br />Max Current: 300mA<br /><br />USB Device ID: VID = 13FE PID = 5500<br />Serial Number: 070B7114D217C331<br /><br />Device Vendor: Wilk<br />Device Name: silicon-power<br />Device Revision: 0100<br /><br />Manufacturer: Wilk<br />Product Model: silicon-power<br />Product Revision: PMAP<br /><br />Chip Vendor: Phison<br />Chip Part-Number: PS2251-07(PS2307) - F/W 06.04.00 [2016-12-01]<br />Flash ID Code: 983A98A3 - Toshiba [TLC]<br /><br />Tools on web:http://dl.mydigit.net/special/up/phison.html<br /><br /><br /><br /><br />Could you please help me step by step to format it?<br />Thanks!<br /><br />Anonymousnoreply@blogger.comtag:blogger.com,1999:blog-5051833343195891315.post-66098680476118361702018-05-29T04:40:16.866+03:002018-05-29T04:40:16.866+03:00Description: [G:]USB Mass Storage Device(13FE USB ...Description: [G:]USB Mass Storage Device(13FE USB DISK 50X)<br />Device Type: Mass Storage Device<br /><br />Protocal Version: USB 3.10<br />Current Speed: Super Speed<br />Max Current: 896mA<br /><br />USB Device ID: VID = 13FE PID = 5100<br /><br />Device Vendor: Phison<br />Device Name: USB DISK 53X<br />Device Revision: 0110<br /><br />Manufacturer: 13FE<br />Product Model: USB DISK 50X<br />Product Revision: PMAP<br /><br />Chip Vendor: Phison<br />Chip Part-Number: PS2251-07(PS2307) - F/W 08.00.5D [2017-05-05]<br />Flash ID Code: 983C98B3 - Toshiba [TLC]<br /><br />Where can i get the Firmware of this 64GB it says"Please insert a disk into a Removable disk"<br />Need your help the format tools above not working.Anonymousnoreply@blogger.comtag:blogger.com,1999:blog-5051833343195891315.post-13238634860514696102017-12-20T14:06:39.714+03:002017-12-20T14:06:39.714+03:00Hello, for All.
Also I have a DTDUO3/32GB Kingston...Hello, for All.<br />Also I have a DTDUO3/32GB Kingston USB3.0 OTG ( 04715-424.A00LF 5V TH:7661293 THAILAND ) <br />with Chip Vendor: PS2251-07(PS2307).<br />I’m facing now with similar situations as you CHUNG (NO Icons appear on My Computer & Disk Management > No info on ‘”Removable Disk” )<br />My mistake whose I format with Low Level Format Utility from Phison PS2251-07 USB recovery Tools > preformat application. <br />From the moment of finished format I face with situation written above.<br />Now I’m afraid to don’t brick the CIP of OTG.<br />If there is someone to help in order to revive that OTG information’s are highly appreciated.<br />Anonymoushttps://www.blogger.com/profile/10917833150592936678noreply@blogger.comtag:blogger.com,1999:blog-5051833343195891315.post-89812659672283083872017-12-20T14:02:59.022+03:002017-12-20T14:02:59.022+03:00Hay, for All.
Also I have a DTDUO3/32GB Kingston U...Hay, for All.<br />Also I have a DTDUO3/32GB Kingston USB3.0 OTG ( 04715-424.A00LF 5V TH:7661293 THAILAND ) <br />with Chip Vendor: PS2251-07(PS2307).<br />I’m facing now with similar situations as you CHUNG (NO Icons appear on My Computer & Disk Management > No info on ‘”Removable Disk” )<br />My mistake whose I format with Low Level Format Utility from Phison PS2251-07 USB recovery Tools > preformat application. <br />From the moment of finished format I face with situation written above.<br />Now I’m afraid to don’t brick the CIP of OTG.<br />If there is someone to help in order to revive that OTG information’s are highly appreciated.<br />Anonymoushttps://www.blogger.com/profile/10917833150592936678noreply@blogger.comtag:blogger.com,1999:blog-5051833343195891315.post-81047112441601733132017-12-02T18:03:38.259+03:002017-12-02T18:03:38.259+03:00write protected solve by Low Level Format Utility....write protected solve by Low Level Format Utility. works for my 32gb toshiba PS2251-07, thanks a lot for sharing.Anonymoushttps://www.blogger.com/profile/05341096017898235608noreply@blogger.comtag:blogger.com,1999:blog-5051833343195891315.post-17733323647175352832017-06-22T21:07:33.913+03:002017-06-22T21:07:33.913+03:00Hi, I faced the same problem.
I have a 32GB OTG ...Hi, I faced the same problem. <br /><br />I have a 32GB OTG micro drive (manufac: Verbatim) as when plugging in windows automatically starts to install the drivers for 'PRAM 2307 USB device'. It doesn’t have any icon appeared in my computer and in Disk Management 'Removable Disk' shows no information beside it.<br /><br />How can I get windows to recognize the drive? Please email to me at colin_lim85@yahoo.com. Thank you. <br /><br />Please refer below for the details:<br /><br />Computer model: Aspire 5740G<br />Maker: Acer<br />OS: Windows 7 professional service pack 1<br /><br />Device Name: +[D:]+Generic USB Hub(2307 PRAM USB Device)<br />PnP Device ID: VID = 8087 PID = 0020<br />Serial Number: 5&&257B0F1D&&0&&1<br />Revision: 1.00<br /><br />Device Type: Standard USB device - USB2.0 High-Speed<br /><br />Chip Vendor: (No match record)<br />Chip Part-Number: (No match record)<br /><br />Product Vendor: 2307<br />Product Model: PRAM<br /><br />Tools on Web: (N/A)<br />Anonymoushttps://www.blogger.com/profile/17290347525151228570noreply@blogger.comtag:blogger.com,1999:blog-5051833343195891315.post-68763071868302935232017-03-29T00:33:56.266+03:002017-03-29T00:33:56.266+03:00Did someone managed to fix the drive? I have Kings...Did someone managed to fix the drive? I have Kingston datatraveler 100 g3 32gb?<br />niklazni@yahoo.comAnonymoushttps://www.blogger.com/profile/08924920600052801429noreply@blogger.comtag:blogger.com,1999:blog-5051833343195891315.post-18760053224144268502017-02-10T23:08:59.618+03:002017-02-10T23:08:59.618+03:00PHISON 2251-07 I HAVE SOLUTION FOR THIS PENDRIVE W...PHISON 2251-07 I HAVE SOLUTION FOR THIS PENDRIVE WITH TOSHIBA FLASH, BUT WITCH Hynix OR MICRON NO, IF ANY OF YOU HAS RAPAIR SOMEONE PLEASE, SENDME AN EMAIL TO DARKMANCUBANO@GMAIL.COMAnonymoushttps://www.blogger.com/profile/13218972454875043767noreply@blogger.comtag:blogger.com,1999:blog-5051833343195891315.post-70385922818601677122016-10-18T14:29:26.673+03:002016-10-18T14:29:26.673+03:00asalamualaikum wr.wb
i've got a dead kingston ...asalamualaikum wr.wb<br />i've got a dead kingston 64 gb with following specs:<br />Description: [O:]USB Mass Storage Device(Kingston DataTraveler 3.0)<br />Device Type: Mass Storage Device<br /><br />Protocal Version: USB 2.10 <- Hint: This is a USB3.0 device working at USB2.0 mode<br />Current Speed: High Speed<br />Max Current: 300mA<br /><br />USB Device ID: VID = 0951 PID = 1666<br />Serial Number: 60A44C4252A8BEB1C99300F4<br /><br />Device Vendor: Kingston<br />Device Name: DataTraveler 3.0<br />Device Revision: 0100<br /><br />Manufacturer: Kingston<br />Product Model: DataTraveler 3.0<br />Product Revision: PMAP<br /><br />Chip Vendor: Phison<br />Chip Part-Number: PS2251-07(PS2307) - F/W 01.02.53 [2014-05-12]<br />Flash ID Code: 983AA892 - Toshiba [TLC]<br /><br />i kind'a mess up with the experiment using various combination of uptools and mpal, and mixed up firmware and burner file too.<br />could you please help me with the correct variant?<br />any off your tips will be much helpfull<br /><br />assalamualaikum wr.wbAnonymoushttps://www.blogger.com/profile/07527751232478166439noreply@blogger.comtag:blogger.com,1999:blog-5051833343195891315.post-61224965354794361332016-09-17T19:08:17.357+03:002016-09-17T19:08:17.357+03:00First of all download phison UPTool_Ver2093(Releas...First of all download phison UPTool_Ver2093(Release)_20150312<br />go setting <br />and enable clean button <br /><br />second Click Clean Button to erase old Firmware <br /><br /><br />after erase you must see 2207 pram<br /><br /><br />download MPALL_F1_7F00_DL07_v503_0A.zip<br /><br /><br />for TLC use FW07V50253TW.BIN<br /><br />copy this lines to mp.ini<br /><br />[PenDriveMP]<br />IC Type=PS2251-07<br />[Parameter Mark]<br />Parameter Type=F1_MP_21<br />[Customize Info]<br />USB VID=0x13FE<br />USB PID=0x5500<br />String Product Name=USB DISK 3.0<br />Inquiry Version=DL07<br />[Configuration]<br />Reset Serial Number=0<br />[TestItemOption]<br />Do Preformat Test=1<br />[Extra]<br />Mode=3<br />[Advance]<br />FC1=0xFF<br />FC2=0x01<br />CheckUSBConnectorType=0x22<br />[Firmware]<br />ISP=1<br />Burner File=BN07V502TAW.BIN<br />Firmware Name=FW07V50253TW.BIN<br />[Misc]<br />Burner Erase All=1<br />Wafer Erase All=1<br />set1667=0x00<br />------------------------------<br />i have a 32gb tlc Write Protect <br /><br />after Firmware now is worked fine <br /><br />Description: USB Mass Storage Device(Parlag USB DISK 3.0)<br />Device Type: Mass Storage Device<br /><br />Protocal Version: USB 2.10 <- Hint: This device can run faster when plugged to a USB3.0 port<br />Current Speed: High Speed<br />Max Current: 300mA<br /><br />USB Device ID: VID = 13FE PID = 5500<br />Serial Number: 7F006914CB8ABA00<br /><br />Device Vendor: Parlag<br />Device Name: USB DISK 3.0<br />Device Revision: 0100<br /><br />Manufacturer: Parlag<br />Product Model: USB DISK 3.0<br />Product Revision: DL07<br /><br />Controller Vendor: Phison<br />Controller Part-Number: PS2251-07(PS2307) - F/W 05.02.53 [2016-03-18]<br />Flash ID code: 454C98A3 - SanDisk [TLC]DAVOD AMIRAJAMhttps://www.blogger.com/profile/15325925922737490774noreply@blogger.com