|
|
Format corrupted USB pen drive that have XXXXXXXX U181Controller .Download XXXXXXXX U181Controller Format tool "URescue " and repair your flash disk .
XXXXXXXX U181Controller Format tool
XXXXXXXX U181Controller Format tool "URescue v81D.2.24.2 " is designed to format and repair USB flash drives that have XXXXXXXX U181 Chip Controller.XXXXXXXX U181Controller can fix flash drive format errors and repair USB flash drives that have the following Chip controller Information "VID = 048f , PID = 1181 " .URescue v81D.2.24.2 recovery tool can update flash firmware with the following chip controllers "IT1181,IT1181,IT117 " .
To repair USB flash disk with XXXXXXXX U181Controller recovery tool , please follow the next flash drive recovery tips :
- To use URescue v81D.2.24.2 software , you must be sure that your chip controllers is one of the following "IT1181,IT1181,IT117 " and also XXXXXXXX U181 chip controller .You can use Chip genius report software or USBDeview V2.30 utility .
- Download XXXXXXXX U181Controller Formatter software from the download links in the bottom of this article .
- Plug in your corrupted flash disk to your PC .
- If your flash drive is supported , you will see your flash drive information in URescue interface .Click Update to start formatting your flash drive .
If this software doesn't
work with your flash drive ,go to the second solution "remove the case
of the flash drive and write in a comment the details that exist on the chip controller of flash drive board and i will try to find the best firmware for you .
You can try this solution also , please read the following articles :
my chip is Ite it1181, the problem (insert disk) please help me
ReplyDeletemodel number ADATA UV128/16GB USB3.0 THANKS
My friend this is the software for "IT1181,IT1181,IT117 " so u must try it with ue flash drive , if not working so this means ur lash drive vendor isn't 1181 so please open the flash cover and write the information on the small chip to me so we can find u the right software
DeleteHi, this software is not working for my pendrive. Its detecting my prendrive and after I press "update" button, its go up to 5% and display error "rescue failed".
ReplyDeleteDo you have any idea what I can do wrong?
my pendrive is ADATA s102/32GB pro usb 3.0
data from ChipGenius v4.00
Device Type: Mass Storage Device
Protocal Version: USB 2.10 <- Hint: This device can run faster when plugged to a USB3.0 port
Current Speed: High Speed
Max Current: 98mA
USB Device ID: VID = 048D PID = 1181
Device Revision: 0100
Manufacturer: XXXXXXXX
Product Model: U181CONTROLLER
Product Revision: 0.00
Controller Vendor: iTE
Controller Part-Number: IT1181 A1BA
Athanks in advance