Monday, November 17, 2014

Download Innostor IS916 MP Tool v2.10.02.49 firmware


Download Innostor IS916 MP Tool v2.10.02.49 firmware
Format corrupted Innostor flash controllers that have chip part number Innostor IS916-B1, IS916-C1, IS916-D0, IS916-D1.Download Innostor IS916 MP Tool v2.10.02.49 firmware and fix your flash disk .

Innostor IS916 MP Tool v2.10.02.4

Innostor IS916 MP Tool v2.10.02.49 has been designed to reformat Innostor Flash controllers .Innostor IS916 MP Tool v2.10.02.49 format tool support updating the flash controller firmware of the following Innostor chip vendor : Innostor IS916-B1, IS916-C1, IS916-D0, IS916-D1 .Innostor IS916 MP Tool v2.10.02.49 formatter can fix Innostor flash drives format errors such as raw flash disk ,write protection ,insert disk error message , no media and other format problems .

Innostor IS916 MP Tool v2.10.02.49 can recover the previous chip controllers and it has been recovered Verbatim store n go USB flash drive 16GB with IS916 chip vendor with the following chip genius report :

Verbatim store n go USB flash drive 16GB chip genius report :
Device Type: Mass Storage Device
Protocal Version: USB 2.10
Current Speed: High Speed
Max Current: 200mA
USB Device ID: VID = 1F75 PID = 0916
Device Vendor: Innostor Technology Corp.
Device Name: IS916EN
Device Revision: 0001
Manufacturer: Innostor
Product Model: NAND Flash
Product Revision: 1.00
Chip Vendor: Innostor(??)
Chip Part-Number: IS916

 Innostor IS916 MP Tool v2.10.02.49 firmware support repairing the previous chip controllers , so please don't use it with different controllers .First determine your USB flash disk chip vendor , you can use Chip genius software or USB Deview V2.30 utility. 

How to update Innostor IS916 flash drive firmware ?

Download Innostor IS916 MP Tool v2.10.02.49 firmware
  • Download Innostor IS916 MP Tool v2.10.02.49.rar from download links below .
  • Insert corrupted Innostor IS916 flash disk to your PC .
  • Extract Innostor IS916 MP Tool v2.10.02.49.rar and open Innostor IS916 MP Tool v2.10.02.49.exe .
  • If your flash controller is supported , you will see flash info appears on the software interface .
  • Click Start to update flash controller firmware .
  • If you need to change configuration " Config Password : IS0024 " .


If this software doesn't work with your flash drive ,go to the second solution "remove the case of the flash drive and write in a comment the details that exist on the chip controller of flash drive board and i will try to find the best firmware for you .
You can try this solution also , please read the following articles :

Search tags :
Innostor IS916 MP Tool v2.10.02.49
Innostor IS916 MP Tool v2.10.02.49.rar
Innostor IS916 MP Tool v2.10.02.49.exe
Innostor IS916 MP Tool
Innostor IS916 formatter
Innostor IS916 firmware

To download  from our download links ,click on download link then wait 5 Sec then Click Skip AD to download software look to this Picture .

Download  Innostor IS916 MP Tool v2.10.02.49


Innostor IS916 MP Tool v2.10.02.49 firmware























File Name:InnostorIS916 MP Tool
 OS : Windows
Program version:v2.10.02.49                         
Software Size : 2.60 MB
Description:
Innostor firmware

22 comments:

  1. Hi Ashraf
    I'm Nathanael and i've got a lexar 32GB flash drive that isn't working properly the numbers on the chip are: PF47, AL, 1242, and RRYG. I've run it through ChipGenius and also Innostor IS916 MP Tool and i can send screen shots of the outcome if it helps.

    ReplyDelete
  2. how to flip the removable bit with this tool?

    ReplyDelete
  3. Hello, i had try this tool and i can find my usb stick, but it fails because config fail. I had also tried with the both external configfiles.
    BK0: 2C88044BA90000002C8804
    BK1: 2C88044BA90000002C8804

    Thanks

    ReplyDelete
  4. Спасибо, помогло. KingMax 8Gb.

    ReplyDelete
  5. Device Name: +[G:]+Generic USB Hub(Innostor NAND Flash USB Device)

    PnP Device ID: VID = 8087 PID = 8000
    Serial Number: 5&&BD7C12&&0&&1
    Revision: 1.00

    Device Type: Standard USB device -

    Chip Vendor: (No match record)
    Chip Part-Number: (No match record)

    Product Vendor: Innostor
    Product Model: NAND Flash

    Tools on Web: (N/A)

    ReplyDelete
  6. Description: [F:]USB Mass Storage Device(Innostor NAND Flash)
    Device Type: Mass Storage Device

    Protocal Version: USB 3.00
    Current Speed: High Speed
    Max Current: 496mA

    USB Device ID: VID = 1F75 PID = 0916

    Device Vendor: Innostor Technology Corp.
    Device Name: IS916
    Device Revision: 000D

    Manufacturer: Innostor
    Product Model: NAND Flash
    Product Revision: 1.00

    Controller Vendor: Innostor
    Controller Part-Number: IS916-D0 - ??ROM??
    Flash ID code: 68686868 - 1CE/Single Channel [TLC Toggle-DDR] -> Total Capacity = 4GB

    Tools on web: http://dl.mydigit.net/special/up/innostor.html


    Possible Flash Part-Number
    ----------------------------
    Unknown


    Flash ID mapping table
    ----------------------------
    [Channel 0] [Channel 1]
    686868686868 --------
    090909090909 --------
    -------- --------
    -------- --------

    Drive could not be repaired.

    ReplyDelete
  7. Description: [F:]Dispositivo de almacenamiento USB(Innostor NAND Flash)
    Device Type: Mass Storage Device

    Protocal Version: USB 2.10 <- Hint: This device can run faster when plugged to a USB3.0 port
    Current Speed: High Speed
    Max Current: 500mA

    USB Device ID: VID = 1F75 PID = 0916

    Device Vendor: Innostor Technology Corp.
    Device Name: IS916
    Device Revision: 000D

    Manufacturer: Innostor
    Product Model: NAND Flash
    Product Revision: 1.00

    Controller Vendor: Innostor
    Controller Part-Number: IS916-D0 - ??ROM??
    Flash ID code: 2C88044B - Micron MT29F128G08CFAAA - 2CE/Single Channel [MLC-8K] -> Total Capacity = 16GB

    Tools on web: http://dl.mydigit.net/special/up/innostor.html


    Possible Flash Part-Number
    ----------------------------
    [1CE]MT29F64G08CBAAA(25nm) x 2 pcs/Channel x 1 Channel
    [2CE]MT29F128G08CFAAA(25nm) x 1 pcs/Channel x 1 Channel


    Flash ID mapping table
    ----------------------------
    [Channel 0] [Channel 1]
    2C88044BA900 --------
    2C88044BA900 --------
    -------- --------
    -------- --------

    ReplyDelete
  8. Controller: Innostor IS917 E1
    Possible Memory Chip(s): Not available
    Flash ID: 2CA46432 AA04
    Flash CE: 1
    Chip F/W: 41.06.01.70
    VID: 1F75
    PID: 0917
    Manufacturer:
    Product: USB DISK
    Query Vendor ID:
    Query Product ID:
    Query Product Revision: 1.00
    Physical Disk Capacity: 31457280000 Bytes
    Windows Disk Capacity: 31440437248 Bytes
    Internal Tags: CXZH-QCB4
    File System: FAT32
    Relative Offset: 64 KB
    USB Version: 3.00 in 2.00 port
    Declared Power: 200 mA
    ContMeas ID: DE29-03-00

    ReplyDelete
  9. Description: [F:]USB Mass Storage Device(Innostor NAND Flash)
    Device Type: Mass Storage Device

    Protocal Version: USB 3.00
    Current Speed: High Speed
    Max Current: 504mA

    USB Device ID: VID = 1F75 PID = 0916

    Device Vendor: Innostor Technology Corp.
    Device Name: IS916
    Device Revision: 000B

    Manufacturer: Innostor
    Product Model: NAND Flash
    Product Revision: 1.00

    Controller Vendor: Innostor
    Controller Part-Number: IS916-B0 - ??ROM??
    Flash ID code: ECDE98CE - Samsung K9ACGD8U0M - 1CE/Single Channel [TLC-8K Toggle-DDR] -> Total Capacity = 8GB

    Tools on web: http://dl.mydigit.net/special/up/innostor.html


    Possible Flash Part-Number
    ----------------------------
    [1CE]K9ACGD8U0M(27nm) x 1 pcs/Channel x 1 Channel


    Flash ID mapping table
    ----------------------------
    [Channel 0] [Channel 1]
    ECDE98CE74C3 --------

    ReplyDelete
  10. Description: [D:]USB Mass Storage Device(Generic NAND Flash)
    Device Type: Mass Storage Device

    Protocal Version: USB 2.10 <- Hint: This device can run faster when plugged to a USB3.0 port
    Current Speed: High Speed
    Max Current: 200mA

    USB Device ID: VID = 3538 PID = 0901
    Serial Number: 000000000000000949

    Device Vendor: PQI
    Device Name: USB Flash Drive
    Device Revision: 1075

    Manufacturer: Generic
    Product Model: NAND Flash
    Product Revision: 1.00

    Controller Vendor: Innostor
    Controller Part-Number: IS916EN-A2

    Tools on web: http://dl.mydigit.net/special/up/innostor.html


    please help

    ReplyDelete
  11. download link is not working .please fix it.

    ReplyDelete
  12. Description: [E:]USB Mass Storage Device(Innostor NAND Flash)
    Device Type: Mass Storage Device

    Protocal Version: USB 2.10 <- Hint: This device can run faster when plugged to a USB3.0 port
    Current Speed: High Speed
    Max Current: 500mA

    USB Device ID: VID = 1F75 PID = 0916

    Device Vendor: Innostor Technology Corp.
    Device Name: IS916
    Device Revision: 000D

    Manufacturer: Innostor
    Product Model: NAND Flash
    Product Revision: 1.00

    Controller Vendor: Innostor
    Controller Part-Number: IS916-D0 - ??ROM??
    Flash ID code: 2C88044B - Micron MT29F128G08CFAAA - 2CE/Single Channel [MLC-8K] -> Total Capacity = 16GB

    Tools on web: http://dl.mydigit.net/special/up/innostor.html


    Possible Flash Part-Number
    ----------------------------
    [1CE]MT29F64G08CBAAA(25nm) x 2 pcs/Channel x 1 Channel
    [2CE]MT29F128G08CFAAA(25nm) x 1 pcs/Channel x 1 Channel


    Flash ID mapping table
    ----------------------------
    [Channel 0] [Channel 1]
    2C88044BA900 --------
    2C88044BA900 --------
    -------- --------
    -------- --------

    ReplyDelete
  13. Description: [E:]USB Mass Storage Device(Innostor NAND Flash)
    Device Type: Mass Storage Device

    Protocal Version: USB 2.10 <- Hint: This device can run faster when plugged to a USB3.0 port
    Current Speed: High Speed
    Max Current: 200mA

    USB Device ID: VID = 1F75 PID = 0916

    Device Name: IS916EN
    Device Revision: 0001

    Manufacturer: Innostor
    Product Model: NAND Flash
    Product Revision: 1.00

    Controller Part-Number: Unknown

    ReplyDelete
  14. Description: [E:]USB Mass Storage Device(Innostor NAND Flash)
    Device Type: Mass Storage Device

    Protocal Version: USB 2.10 <- Hint: This device can run faster when plugged to a USB3.0 port
    Current Speed: High Speed
    Max Current: 200mA

    USB Device ID: VID = 1F75 PID = 0916

    Device Name: IS916EN
    Device Revision: 0001

    Manufacturer: Innostor
    Product Model: NAND Flash
    Product Revision: 1.00

    Controller Part-Number: Unknown



    ReplyDelete
  15. D27UCG8T2MYR Innostor Flash drive MP tool.

    innostor IS916 MP Tool v2.10.02.49 is not working

    ReplyDelete
  16. Description: [H:]USB Mass Storage Device(Innostor NAND Flash)
    Device Type: Mass Storage Device
    Protocal Version: USB 3.00
    Current Speed: High Speed
    Max Current: 400mA
    USB Device ID: VID = 1F75 PID = 0917
    Device Vendor: Innostor Technology Corp.
    Device Name: IS917
    Device Revision: 0001
    Manufacturer: Innostor
    Product Model: NAND Flash
    Product Revision: 1.00
    Controller Vendor: Innostor
    Controller Part-Number: IS917-E0 - ??ROM??
    Flash ID code: 45DE9493 - SanDisk SDTNRGAMA-008G - 4CE/Single Channel [MLC-16K] -> Total
    Capacity = 32GB


    Pls Give Me Flash File..I Wana To Repair My Pen Drive

    ReplyDelete
  17. Description: [H:]USB Mass Storage Device(Innostor NAND Flash)
    Device Type: Mass Storage Device
    Protocal Version: USB 3.00
    Current Speed: High Speed
    Max Current: 400mA
    USB Device ID: VID = 1F75 PID = 0917
    Device Vendor: Innostor Technology Corp.
    Device Name: IS917
    Device Revision: 0001
    Manufacturer: Innostor
    Product Model: NAND Flash
    Product Revision: 1.00
    Controller Vendor: Innostor
    Controller Part-Number: IS917-E0 - ??ROM??
    Flash ID code: 45DE9493 - SanDisk SDTNRGAMA-008G - 4CE/Single Channel [MLC-16K] -> Total
    Capacity = 32GB

    Pls Give Me A Flash File.. i Wana to repair my flash drive

    ReplyDelete
  18. Description: [F:]USB Mass Storage Device(NAND USB2DISK)
    Device Type: Mass Storage Device

    Protocal Version: USB 2.00
    Current Speed: High Speed
    Max Current: 100mA

    USB Device ID: VID = FFFF PID = 1201

    Device Revision: 0000

    Manufacturer: NAND
    Product Model: USB2DISK
    Product Revision: 0.00

    Controller Vendor: FirstChip
    Controller Part-Number: FC1178BC
    Flash ID code: 453A94937651 - SanDisk - 1CE/Single Channel [MLC] -> Total Capacity = 16GB

    ReplyDelete
  19. Description: [J:]USB Mass Storage Device(Innostor NAND Flash)
    Device Type: Mass Storage Device

    Protocal Version: USB 2.10 <- Hint: This device can run faster when plugged to a USB3.0 port
    Current Speed: High Speed
    Max Current: 200mA

    USB Device ID: VID = 1F75 PID = 0917

    Device Vendor: Innostor Technology Corp.
    Device Name: IS917
    Device Revision: 0001

    Manufacturer: Innostor
    Product Model: NAND Flash
    Product Revision: 1.00

    Controller Vendor: Innostor
    Controller Part-Number: IS917-E0 - ??ROM??

    Tools on web: http://dl.mydigit.net/special/up/innostor.html

    ReplyDelete
  20. where can i find tool for IS917 ?

    ReplyDelete
  21. where can i find tool IS917-D1? plis

    ReplyDelete